Re: rcf n481 driver/horn

[ Follow Ups ] [ Post Followup ] [ live-audio Board ]

Posted by Andrew W on June 21, 2003 at 03:54:55:

In Reply to: rcf n481 driver/horn posted by charles mike ranger on June 21, 2003 at 03:13:13:

Hi Mike,
120 watts
500hz-20k.
Recommended crossover 1500-1800hz.
Used to have some in monitor wedges. Quite a reasonable sounding 1 inch, used on the right flare.
See ya
Andrew

: i found a beat up discarded monitor wedge that had a working RCF N 481 driver / horn in it. i need info on frequency range,power limits and any other info (such as the quality of this item) .
: i'll put a jbl e-140 in the wedge with it.what would be a good xover point ?
: thanks, mike

Follow Ups:

Post a Followup

Name    : 
E-Mail  : 
Subject : 

Comments:
: Hi Mike,
: 120 watts
: 500hz-20k.
: Recommended crossover 1500-1800hz.
: Used to have some in monitor wedges. Quite a reasonable sounding 1 inch, used on the right flare.
: See ya
: Andrew


: : i found a beat up discarded monitor wedge that had a working RCF N 481 driver / horn in it. i need info on frequency range,power limits and any other info (such as  the quality of this item) .
: :  i'll put a jbl e-140 in the wedge with it.what would be a good xover point ? 
: :  thanks, mike



Optional Link URL:  
Link Title:         
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ live-audio Board ]

Universal Concept Message Software © 2000 2001 2002, ProSoundWeb.com Live Audio Board is a Trademark of Universal Concept Inc, Whitinsville, MA. All Rights Reserved.
By using this site, you agree to be bound by our terms and conditions